Can the micro high-pressure water pump be powered by dry batteries, accumulators, etc.?

       Since the commonly used dry batteries (such as the 1.5V No. 1 battery) have a relatively large internal resistance, they provide relatively small current, and a large part of the voltage is consumed in the internal resistance, so the voltage drops faster. It is not suitable to power the micro high-pressure water pump.

The battery is a general term for storage battery. Because the principle is different from dry battery, it can provide larger current and power. It is widely used in electric vehicles, automobiles and other mobile vehicles, agricultural spraying spray, field sampling and other occasions where power is lacking.

     For example, the micro high-pressure water pump ASP5526 has a working voltage of 12V DC and a maximum working current of 2.2A. First of all, the voltage must match, 12V; second, the length of time the battery is used is measured by AH (Ampere hour). Assuming that a 12V20AH battery or battery is used as a power source, the actual current of the pump is 2A (the current depends on the working conditions), theoretically, it can be used for 10 hours; if it is changed to 12V30AH, the time can be extended to 15 hours. Of course, the larger the AH (ampere hour), the more expensive the battery.

          Let's also briefly introduce the micro high-pressure water pump ASP5526, which has an opening flow rate of 26 liters/min, truly self-priming 0.7 meters, and is cost-effective. The pump has an over-pressure protection function, which can automatically shut down for protection when the maximum output pressure of the pump is exceeded, and automatically start when it is lower than the cut-off pressure. The miniature high-pressure water pump ASP5526 combines the advantages of self-priming pumps and chemical pumps. It is synthesized from a variety of corrosion-resistant imported materials, resistant to weak acids, weak alkalis, and weak corrosion. The pump body is separated from the motor, and the working medium is not in contact with the motor to avoid damage to the motor due to liquid entering the motor after a long period of use, such as centrifugal pumps. Miniature high-pressure water pump ASP5526, stable operation, stable meteor, can be idling (idling time cannot exceed 30 minutes), exquisite workmanship, small size, light weight, stable performance, easy installation.